16
17
– Turn the decompression lever until stop „1“ is
reached. In this position the automatic decom-
pression system is heard to engage and the
engine can then be started; Figs. 16 and 17.
18
After the automatic decompression device has
engaged at its limit stop, five turns of the crank
handle are needed for the engine to build up
compression and fire again.
4.2.2. Starting with the handle
For preparations to start the engine,
see Chapter 4.2.1.
19
For correct position to adopt when starting the
engine, see Fig. 19.
To Next Page
Loading...
