Hatz 1D81. - Exhaust System Installation and Emissions; Exhaust System Installation Steps

44
INSTRUCTIONS ON THE INSTALLATION OF THE EXHAUST SYSTEM
Following are the instructions to properly install the exhaust system and related
components consistent with the EPA emission regulation requirements.
Exhaust-silencers and protection guard
The exhaust silencer is fitted in connection with studs, flat washers and hex.-nuts.
Fixation is done by Allen screws.
1
2
4
4
1
2
4
4
3
2
3
3
1
23 Nm
17 lb ft
A) B)
C)
3
1D41 · 1D50 · 1D81 · 1D90 S / Z