Maintenance 2G40, 2G40 H
58
HATZ
Operator’s Manual
Procedure
Step Activity
1 Keep a container ready for collecting the used oil. The con-
tainer must be large enough to hold the entire amount of en-
gine oil. For the engine oil filling quantity, see section 4.1 En-
gine information and filling quantities, page 20.
2 Unscrew the oil drain screw (1) and drain the oil entirely.
3 Screw in the cleaned oil drain screw (1) with the new gasket
(2) and tighten.
Tightening torque: see chapter 4.1 Engine information and fill-
ing quantities, page 20.
Changing the oil filter
Overview
1 Strap wrench
2 Screen plate
3 Sealing surface
To Next Page
Loading...
