Maintenance 2G40, 2G40 H
68
HATZ
Operator’s Manual
CAUTION
Danger of environmental damage from spilled fuel.
When the filter is removed, a small amount of fuel is drained as
well.
▪ Collect any escaping fuel and dispose of it according to lo-
cal environmental regulations.
CAUTION
Dirt particles can damage the injection system.
▪ Maintain clean conditions to ensure dirt does not enter the
fuel line.
Overview
1 Fuel feed line
2 Fuel filter
Procedure
Step Activity
1 Lock the fuel feed line before and after the fuel filter.
2 Place a suitable container under the fuel filter to collect emerg-
ing fuel.
3 Pull the fuel line (1) off the fuel filter (2) on both sides, and insert
a new filter.
Observe the flow-through direction (arrows).
4 Release the fuel feed, and pre-pump the fuel (see chapter 7.3.1
Pumping fuel with the manual lever, page 34).
5 Check the fuel filter and lines for tightness after a brief trial run.