Installing the WinTV-USB
N
ote: DO NOT PLUG THE WinTV-USB into your PC until
your PC has fully booted..
To install WinTV-USB under Windows XP, 98 or 2000, you will follow these
steps:
✓ Plug the WinTV-USB into your PC or laptop’s USB port (after booting into
Windows)
✓ Install the drivers from the WinTV-USB Installation CD-ROM
✓ After the WinTV-USB driver is installed, you will then install the WinTV
application software from the WinTV Installation CD-ROM
Contents of the WinTV-USB package:
WinTV-USB or WinTV-USB-FM unit
1 meter audio cable - sound cable for connecting between the WinTV-
USB and your sound card
S-Video to composite adapter
FM radio antenna (on WinTV-USB-FM models)
WinTV-USB Warranty registration card
WinTV-USB Installation CD-ROM with:
WinTV2000 application
WinTV driver for WindowsXP, 98SE, Me and Windows2000
WinTV-USB connections
The following chart shows the connectors of the WinTV-USB.
FM: FM radio antenna connection (on some models)
TV: TV antenna or cable TV connection
LineOut: Audio output 1/8” minijack (connects to sound card LineIn jack)
S-Video In: S-video input from an external A/V source. Composite video can
be used via the S-Video to Composite adapter.
Line In: Audio input from an external A/V source (1/8” minijack)
1-1
To Next Page
Loading...
Need help?
General