HAUSSLER ALPHA - Display Errors and Component Issues

21
Fault Cause Soluon Illustraon
The device shows
"th" on the display
The motor tempe-
rature is too high
 Allow
the motor to
cool.
The dough hook is
not in the dough
hook mounng
The exible
retaining screws
have moved
 Adjust
the retaining
screws using
a small
screwdriver (x).
The mixer bowl is
causing noise
The mixer bowl is
not sing properly
in the bowl
mounng
 Lock the mixer
bowl rmly in
a clockwise
direcon.
The locking clip is
loose
The guide bushings
have worn out
 Replace
the guide
bushings (Y).
Tab. 6: Troubleshoong
Should further problems occur, please call our service team on the following number:
+49 73 71/93 77-13
Troubleshoong