HAUSSLER ALPHA - Maintenance and Lubrication; Safety Precautions for Maintenance; Lubricating the Tilting Head Tappet

18
8 Maintenance
⚠ WARNING
Danger to life from mains voltage 230 V / 50 Hz
Electric shock
 Always disconnect the device from the power supply before commencing
maintenance work.
 Only qualied specialist personnel are permied to carry out maintenance
work on electric components.
⚠ CAUTION
Danger of crushing by rotang parts
Injuries to ngers and hands
 Disconnect the device from the power supply.
 Do not start up the device without the guard and housing parts.
iComponent-specic grease must be used for maintenance. For suitable grease, see
chapter 12 “Accessories” on page 31.
Disconnecng the power supply
 Switch o the device.
 Unplug the mains plug.
Lubricang the tappet at the lng head
iCheck every 4 weeks whether the tappet is sll fully lubricated with food-safe lu-
bricant.
iFor idencaon of the parts, see Tab. 3 on page 8.
 Li the protecve cover
2
up.
 Retain the lng head
1
at the locking clip
8
, pull the locking clip out to the stop
and guide the lng head upwards.
 Where necessary, brush the tappet
6
generously with a suitable lubricant.
Maintenance