FUNCTIONS OF SMART
INDICATORS
DIGIPLUS
TANK FULL INDICATOR:
Tank icon indication will be solid which informs tank is full
PURIFICATION PROCESS INDICATOR:
If water is not dispensed from the system for 4 hours, UV Colum will turn
ON and the water stored in tank will be disinfected by recirculating through
UV disinfection column.
During this cycle, UV & water drop icon will blink.
The periodic treatment process ensures safe drinking water all the time.
FILTER LIFE
11 12
PERIODIC DISINFECTION
Switch ON your Digiplus Water purifier, system will go in self check mode
and all indications on display panel will glow for 3 second.
After 3 second self-test, UV disinfection will start & UV indication will start
blinking. for next 30 second system will disinfect the stagnant water in UV
column.
Once disinfection cycle is over, system will start purifying water and fillin
purified water tank. During this period purification process (water drop) icon
will blink and UV icon will glow solid. If water is dispensed from the system,
the purification process will restart.
Your Filters life is counted, on the basis of the usage. One by one the bars of
filter life indication will turn off with reducing life. On completion of 90% life
of filters, last bar of filter life indication will start blinking. This is the time to
call Havells service for change of filter.
On completion of 100% life ‘Filter life indication’ (all 5 bars) will start
blinking with buzzer. This is the time to replace your filters.
To Next Page
Loading...