hawa Concepta 25 User Manual

Hawa Concepta 25/30
Planungs- und Montageanleitung
Beschlag für seitlich einschiebbare Möbelfronten aus Holz bis 25/30 kg.
Instructions de conception et de montage
Ferrure pour façades de meubles en bois à escamotage latéral jusqu'à
25/30 kg.
Planning and installation instructions
Hardware system for wooden pivot sliding cabinet doors up to 25/30 kg
(55/66 lbs.).
Istruzioni di progettazione e di montaggio
Ferramenta per frontali di mobili in legno a scomparsa fino a 25/30 kg.
Instrucciones de planificación y montaje
Herraje para muebles con frente de madera ecamoteable lateralmente hasta
25/30 kg.
30182 a
Patente / Brevets / Patents / Brevetti / Patente
www.hawa.com

hawa Concepta 25 Specifications

General

Brand	hawa
Model	Concepta 25
Category	Indoor Furnishing
Language	English

Summary

Product Information

Intended use

Specifies the intended use of the hardware for wooden doors.

Technical Data

Provides technical specifications for Hawa Concepta 25 and 30 models.

Risk and residual risk

Addresses potential risks and residual risks, especially with electrical appliances.

Safety Warnings and Symbols

Symbol Definitions

Explains the meaning of various safety warning symbols used in the manual.

Planning

Planning for Inset Doors

Guidance for planning the installation of inset doors.

Planning for Two Inset Pivot Sliding Doors

Planning for Doors Closing Against Base/Top (Connector 55)

Planning for Doors Closing Against Base/Top (Connector 110)

Planning for Doors in Wall Recess

Calculation

Door Weight/Height Ratio Calculation

Method for calculating the ratio of door weight to door height.

Hardware Depth Calculation

Drill Hole Positions (HAWA Concepta 25)

Specifications for drilling hole positions for the Concepta 25 model.

Drill Hole Positions (HAWA Concepta 30)

Specifications for drilling hole positions for the Concepta 30 model.

Assembly

Scissor and Upright Installation (Left-Hand)

Step-by-step guide for installing the scissor and upright on the left side.

Scissor and Upright Installation (Right-Hand)

Step-by-step guide for installing the scissor and upright on the right side.

Door Assembly

Instructions for assembling the door to the hardware system.

Door Closing System Assembly

Steps for installing and setting up the door closing system.

Fine Adjustment: Upright Inclination (19-30mm Doors)

Guide for fine-tuning upright inclination for doors 19-30mm thick.

Fine Adjustment: Upright Inclination (31-50mm Doors)

Positioning the Top Stop Dampener

Positioning the Bottom Stop Dampener

Door Height Adjustment

Fine Adjustment: Door Clearance Gap

Fine Adjustment: Front Depth

Fine Adjustment of Doors

Fine Adjustment: Pull-in Speed