hawa Folding Concepta 25 User Manual

HAWA-Folding Concepta 25
Planungs- und Montageanleitung
Beschlag für seitlich einschiebbare Falttüren bis 25 kg pro Tür.
Planification et instructions de montage
Ferrure pour portes pliantes et escamotage latéral jusqu’à 25 kg par porte.
Planning and installation instructions
Hardware for bi-folding cabinet pocket doors up to 25 kg (55 lbs.) per door.
Progetto e istruzioni di montaggio
Ferramenta per ante pieghevoli rientranti fino a 25 kg ciascuna.
Planificación y instrucciones de montaje
Herraje para puertas plegables insertables en el lateral de hasta 25 kg por panel.
Weitere Info siehe:
Plus d’infos sous :
For more information see:
Per ulteriori informazioni vedere:
Para más información veáse:
23721 -
Click Here to View Adjustment Video

hawa Folding Concepta 25 Specifications

General

Brand	hawa
Model	Folding Concepta 25
Category	Indoor Furnishing
Language	English

Summary

Product Information

Installation Instructions

Guidance on installer responsibility for hardware fixation, screw selection, and load-bearing capacity.

Overviews

Overview of left-hand systems

Diagram illustrating the left-hand installation of system components.

Overview of right-hand systems

Diagram illustrating the right-hand installation of system components.

Overview of floor profile

Overview of magnetic centring part

Overview of lock catch for espagnolette lock TERZA 3017

Overview of reinforcement profile for cabinet top

Calculations

Layout dimensions

Drill position external face

Specifies drilling positions on the external face of the cabinet.

Drill position cabinet face

Specifies drilling positions on the cabinet's internal face.

Drill position door with door height 1851 mm - 2600 mm

Drilling positions for doors with heights between 1851 mm and 2600 mm.

Drill position door with door height 1250 mm - 1850 mm

Drilling positions for doors with heights between 1250 mm and 1850 mm.

Calculating and processing profiles

Pre-assembly

Pre-assembly of the pivot door

Instructions for the initial assembly of the pivot door.

Pre-assembly of folding door

Assembly

Scissor and bar installation, left-hand systems

Step-by-step guide for scissor and bar installation on the left side.

Scissor and bar installation, right-hand systems

Step-by-step guide for scissor and bar installation on the right side.

Exterior face assembly

Top track and curve piece assembly

Pivot door assembly

Pivot door fine adjustment

Steps for fine-tuning the pivot door after initial assembly.

Folding door assembly

Folding door fine adjustment

Steps for fine-tuning the folding door after initial assembly.