hawa Concepta 30 User Manual

Hawa Concepta 25/30
Planungs- und Montageanleitung
Beschlag für seitlich einschiebbare Möbelfronten aus Holz bis 25/30 kg.
Instructions de conception et de montage
Ferrure pour façades de meubles en bois à escamotage latéral jusqu'à
25/30 kg.
Planning and installation instructions
Hardware system for wooden pivot sliding cabinet doors up to 25/30 kg
(55/66 lbs.).
Istruzioni di progettazione e di montaggio
Ferramenta per frontali di mobili in legno a scomparsa fino a 25/30 kg.
Instrucciones de planificación y montaje
Herraje para muebles con frente de madera ecamoteable lateralmente hasta
25/30 kg.
30182 a
Patente / Brevets / Patents / Brevetti / Patente
www.hawa.com

hawa Concepta 30 Specifications

General

Brand	hawa
Model	Concepta 30
Category	Indoor Furnishing
Language	English

Summary

Planning and Installation Instructions

Product Information

Safety Instructions

Planning

Inset Doors Planning

Guide for Two Inset Pivot Sliding Doors

Doors Closing Against Base and Top Section with Connector 55

Doors Closing Against Base and Top Section with Connector 110

Doors in Wall Recess Planning

Calculations

Door Weight to Size Ratio Calculation

Calculation to determine the ratio of door weight to door dimensions.

Plan View Dimensions Calculation

Hardware Depth Calculation

Drill Hole Positions HAWA Concepta 25

Drill Hole Positions HAWA Concepta 30

Pre-assembly

Assembly

Scissor and Upright Installation (Left-Hand)

Assembly of the scissor and upright for left-hand installations.

Scissor and Upright Installation (Right-Hand)

Assembly of the scissor and upright for right-hand installations.

Door Assembly

Steps for assembling the door onto the system.

Door Closing System Assembly

Assembly of the door closing system mechanism.

Fine Adjustment of Upright Inclination (19-30mm)

Fine adjustment for upright inclination for door thickness 19-30 mm.

Fine Adjustment of Upright Inclination (31-50mm)

Fine adjustment for upright inclination for door thickness 31-50 mm.

Positioning Top Stop Dampener

Instructions for positioning the top stop dampener.

Positioning Bottom Stop Dampener

Instructions for positioning the bottom stop dampener.

Door Height Adjustment

Procedure for adjusting the door height.

Door Clearance Gap Fine Adjustment

Fine adjustment for the door clearance gap.

Front Depth Fine Adjustment

Fine Door Adjustment

Fine Adjustment of Pull-in Speed