To Next PageTo Next Page
Need help?Do you have a question about the Hawker LIFEPLUS LPM3-48F-160G and is the answer not in the manual?
General| Brand | Hawker |
|---|---|
| Model | LIFEPLUS LPM3-48F-160G |
| Category | Battery Charger |
| Language | English |
Explains charger identification via part and UL model numbers.
Guidance on selecting a suitable installation location for the charger.
Instructions for permanently mounting cabinet chargers vertically.
Precautions and steps for connecting the charger's input power.
Requirement for branch circuit protection and disconnect method.
Table showing recommended breaker/fuse sizes based on AC amps.
Displays charger operation information and menus.
Buttons used to navigate through menus and options.
Button to stop and restart battery charge cycles.
Port for logging data, updating firmware, and saving parameters.
Accesses settings for date, time, language, and other configurations.
Where authorized personnel enter passwords for service level access.
Used to change the main password for the charger.
Used to change the admin password for higher-level access.
Saves charge history data to a USB storage device.
Adjusts AH capacity for charger rate determination, or auto-transmits via BBWC.
Instructions for setting charge profiles based on battery type and firmware.
Enables automatic adjustment of battery AH for ionic profiles.
Adjusts regulation voltages based on battery temperature (5°-149°F).
Defines a safety limit for battery temperature during charging.
Sets the temperature at which charging restarts after a stop due to high temp.
Selects bay size (3, 6, or 12) to match the charger cabinet.
Enters the number of installed power modules.
Selects the type of module installed (24-36-48 or 72-80V).
Sets the battery voltage for 72V or 80V modules.
Explains how to initiate a charge cycle manually or automatically.
Details the scanning, syncing, and enumerating process for BBWC connection.
Describes how to manually start an equalize charge.
Displays the operational status (OK/FAIL) of each installed module.
Technical drawings showing dimensions for 3-bay wall mounting.
