Hawker LIFEPLUS LPM3-48F-300Y User Manual

For local parts, sales and service, call toll-free 1-800-251-6560.
AM-HLPM3-OM
Rev AB September 2019
Model:
S/N:
AC Input Voltage
Installed by
Date
IMPORTANT
Read and understand your user’s manual before installing, operating, or servicing this
product.
DO NOT DESTROY THIS BOOK
Battery Charger
with Wireless Communications
Owner’s Manual
LIFEPLUS MOD3
Models: LPM3 (Standard and Flex)
LPM3C (CEC)

Hawker LIFEPLUS LPM3-48F-300Y Specifications

General

Voltage	48V
Input Frequency	50/60 Hz
Output Voltage	48V
Output Current	300A
Power	14.4 kW
Operating Temperature	-20°C to +50°C
Storage Temperature	-40°C to +70°C
Cooling Method	Forced Air
Battery Type	Lead Acid
Protection Features	Over Temperature, Short Circuit
Certifications	CE, UL

Summary

Important Safety Instructions

Technical Information

Part Number and UL Model Number

Explains UL Model Number and Part Number for charger identification.

Cabinet Size/Gauge Letter Codes

Describes letter codes for cabinet slots and DC cables in part numbers.

AC Line Voltage Letter Codes

Installation

Location

Guidance on choosing a suitable location for the charger to ensure trouble-free service.

Wall/Floor Mount Cabinet Chargers

Instructions for permanently mounting the charger vertically.

Electrical Connections

Details on connecting input power, AC circuit protection, and breaker/fuse charts.

DC Plug Polarity

Grounding the Charger

Operating Instructions

Charger Compatibility and Profiles

Battery Boss Wireless Connection (BBWC)

Details the BBWC adapter for battery monitoring and charging optimization.

Control Panel Overview

Describes the charger's control panel, including display, buttons, and indicators.

Menu Access

Idle Screen and Main Menu

System Setup

Date and Time Settings

Network Configuration

History and Password Management

Password Management

USB Data Management

Saving setup parameters and history data to a USB device.

Firmware and Parameter Loading

Procedures for loading setup parameters, control firmware, and module firmware.

Charge Profile Configuration

Battery Capacity Settings

Adjusting battery AH capacity for charging rates.

Auto Capacity and Temperature Settings

Configuring auto capacity and battery temperature compensation.

High Battery Temperature Safety

Setting a safety limit for battery temperature to prevent damage.

Charge Profile Selection

How to set charge profiles (Ionic, Opportunity, Gel, Flex).

Ionic Charge Coefficient and AGV Offset

Charger Configuration

Cabinet and Module Specifications

Setting cabinet bay size, number of modules, and module type.

Battery Voltage and DC Cable Setup

Configuring battery voltage and DC cable length/gauge.

Charger Options and Testing

BBWC Communications and Electrovalve

Charging the Battery

Charger Idle Display

Starting a Charge Cycle

Procedures for initiating a battery charge cycle.

Delayed Start Configuration

Countdown and BBWC Connection

Explains countdown and BBWC connection process for charging.

Charging Display

Charging Information Display

Details shown on the display during an active charge.

Equalization

Manual Equalize Procedure

How to manually initiate an equalize charge.

Automatic Equalize Scheduling

How automatic equalization is programmed and executed.

Faults

Fault Codes and Solutions

Lists common faults, their causes, and troubleshooting solutions.

Module Status Display

Module Status Overview

Displays the operational status (OK/FAIL) of each charger module.

Module LED Indicators

Maintenance and Service

Basic Maintenance Requirements

General advice on keeping connections clean and ventilation clear.

Component Locations

Charger Component Identification

Identifies key components like AC INPUT, DC OUTPUT, and module slots.

Internal Cabinet Views

Technical Specifications for 208/220/240V

Technical Specifications for 440V

Technical Specifications for 480V

Technical Specifications for 600V