Hawker LIFEPLUS LPM3-48F-200G User Manual

For local parts, sales and service, call toll-free 1-800-251-6560.
AM-HLPM3-OM
Rev AB September 2019
Model:
S/N:
AC Input Voltage
Installed by
Date
IMPORTANT
Read and understand your user’s manual before installing, operating, or servicing this
product.
DO NOT DESTROY THIS BOOK
Battery Charger
with Wireless Communications
Owner’s Manual
LIFEPLUS MOD3
Models: LPM3 (Standard and Flex)
LPM3C (CEC)

Hawker LIFEPLUS LPM3-48F-200G Specifications

General

Voltage	48V
Amperage	200A
Input Frequency	50/60 Hz
Output Voltage	48V DC
Output Current	200A
Cooling Method	Forced Air
Operating Temperature	-20°C to +50°C
Battery Type	Lead Acid
Protection Features	Reverse Polarity, Over Voltage, Over Current, Over Temperature, Short Circuit
Relative Humidity	5% to 95% (non-condensing)
Compliance	CE

Summary

Important Safety Instructions

General Safety Guidelines

Crucial safety advice before operation and during use.

Installation Procedures

Location and Mounting Guidelines

Electrical Connections and Protection

Connecting input power and AC circuit protection.

Breaker/Fuse Sizing Chart

Description of Operation

Charger Functionality Overview

Operating Instructions

Charger Compatibility and BBWC Integration

Control Panel Interface

Display, Navigation, and Control Buttons

Graphical display, navigation, STOP/START buttons.

USB Port and Menu Access

System Setup and Configuration

Basic System Settings

Date, Time, DST, Language, Units, Energy Saver, Brightness.

Network and History Management

Password Management and USB Operations

Charge Profile Configuration

Battery and Temperature Settings

Firmware Loading and Advanced Profiles

Loading firmware and advanced profile settings.

Equalization Configuration

Scheduling Equalization Cycles

Charge Start and Post Charge Settings

Charge Delay, Blockout, and Opportunity

Post Charge Cool Down Settings

Charger Configuration

Cabinet, Module, and Voltage Settings

Setting bay size, module count, type, and battery voltage.

DC Cable, Options, and I/O Testing

Charging the Battery

Idle Screen and Charge Initiation

Charging Display Information

Key Charging Parameters Displayed

End of Charge and Equalization

Manual and Automatic Equalization

Initiating equalize charges manually or automatically.

Fault Diagnosis and Solutions

Fault Codes and Resolution Steps

Table of faults, causes, and solutions.

Module Status Monitoring

Module Status Overview and LEDs

Display and LED indicators for module status.

Maintenance and Service

Routine Maintenance and Safety

Basic maintenance tasks and safety precautions.

Component Locations

Internal and External Component Identification

Labels for AC input, DC output, and module slots.

Technical Specifications (208/220/240V)

Technical Specifications (440V)

Technical Specifications (480V)

Technical Specifications (600V)