To Next PageTo Next Page
Need help?Do you have a question about the Hawker MotionLine puls and is the answer not in the manual?
Safety precautions and warnings for operating battery chargers.
Guidance on installing the battery charger, including location and connection.
Key technical details and specifications of the battery charger.
Instructions for unpacking and selecting a suitable location for the charger.
Procedure for connecting the charger to the main power supply.
Steps for safely connecting the charger to the battery.
Procedure for the initial startup and functional test of the charger.
Defines the approved and recommended uses for the battery charger.
Steps for connecting the battery and initiating the charging process.
Procedure for safely interrupting and disconnecting the charging process.
Information on factors affecting battery charging duration.
Details on the charger's safety monitoring and fault interruption.
Explanation of the charger's LED indicators and the STOP button function.
Table of fault messages, explanations, and remedies for troubleshooting.
Guidelines for routine maintenance and servicing of the charger.
General| Input Frequency | 50/60 Hz |
|---|---|
| Operating Temperature | -20°C to +50°C |
| Output Voltage | 12/24 VDC |
| Battery Type | AGM, Gel |
| Charging Algorithm | Multi-stage |
| Protection Features | Reverse polarity, over voltage, over current, short circuit, over temperature |
