Explore a new world! www.cnfpv.com
Note: Currently, only frequencies between 4.867G and 6.100G are supported. If not
within this range, the prompt bar will turn red and the setting will not be successful.
Please re-enter.
Frequency fine-tuning:
Control buttons: LEFT (-), RIGHT (+).Range，At this time, the frequency points
that are similar to the current frequency are displayed. According to the signal
strength, you can use the up and down keys to select, and the menu key to confirm
the selection.
FORMAT:
Press LEFT or RIGHT button to enter system setting, 3 options are provided:
AUTO/ PAL/NTSC. If AUTO selected, the input video system will be automatically
identified. System setting will cause display failure.
Brightness:
Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Contrast:
Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Saturation:
Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Sharp:
Control buttons: LEFT (-), RIGHT (+).Range: 1-15.
Latitude:
Control buttons: LEFT (-), RIGHT (+).Range: C1-C3.
SPEAKER:
Adjust the SPEAKER, ON/ OFF.
Black light:
Adjust LED light brightness, Auto, High, Low.
FRQ RSSI
5635 03
5637 03
5639 03
5641 03
5643 03
5645 90
5647 95
5649 03
5651 50
5653 30
5655 03
To Next Page
Loading...