9.2.2 Client Side
You will need to perform Window’s standard Add
New Printer procedure. To do this, select the
“Network Printer” setting as shown in the screen
below and click “Next.”
Select “Connect to a printer on the Internet or on a
home or office network” and enter the URL of your
HWPS12UG print server. The URL format will be
“
http://IP:631/LPT_PORT”. The IP portion of the URL
will be the print server’s IP address. LPT_PORT is
the port name of your print server that your printer is
connected to. For one port print servers, the port
name will be “lpt1”. For Hawking’s three-port print
server, the port names are – lpt1, lpt2 or lpt3
depending on which printer port your printers are
connected to. (Please write down the printer port
and corresponding printer model for configuring our
line of multiple port print servers.) The last number
you will need to write down after the port name and
colon will be 631. 631 is the IPP standard port