4.2 Windows NT/2000 Server Installation and
Setup
Please follow the procedures described below for
installation of a peer-to-peer connection (PTPP)
between a Windows NT/2000 Server and the
HWPS12UG.
Step1.
If this is your first time installing the print server,
please install the administrator software on your
Windows NT/2000 server first. Refer to section 3.2
for installation instructions.
If your network has already an installed working
print server and your Windows NT/2000 server has
not yet installed the PTPP driver, please install the
client software. Refer to section 3.4 and 3.5 for
installation instructions.
Step2.
To Next Page
Loading...
Need help?
General
