Hawking HWPS12UG User Manual

2. Hardware Installation
1. Unpack the HWPS12UG’s packaging and check
all the items listed in section 1.2.
2. Connect the HWPS12UG to the printer you want
to share on your network.
3. Connect the power adapter to the print server.
4. The print server will perform the Power-On-Self-
Test (POST) after it is powered on. The Status LED
will flash for up to one minute to indicate that the
print server is ready.
NOTE1 : You MUST use the power adapter shipped with the HWPS12UG
print server, do NOT use any other power adapter from any other
sources.
NOTE2: To prevent any compatibility problems between the HWPS12UG
and other printers, it is recommend that you power on the print
server before the printer.

Hawking HWPS12UG Specifications

General

Brand	Hawking
Model	HWPS12UG
Category	Print Server
Language	English