22. Select Queues Serviced by Printer, then select
Printer 0 (or Printer 1, Printer 2) and press Enter.
23. Press Insert and add your newly created print
queue to the list of queues serviced by the printer.
Enter a priority number for the queue service, or
press Enter to accept the default.
24. Repeatedly press Escape to exit the PCONSOLE
program.
25. Reset the print server to have the changes take
effect.
NOTE: If the print server you have is with multiple
printer connectors, you may create multiple print
queues and printer objects.
Your print server should now be ready to use. You
should be able to redirect printing to your print
server using a CAPTURE command like the one
shown in the previous section.
To Next Page
Loading...
Need help?
General
