Hawking HWPS12UG User Manual

mkdir /var/spool/lpd/pserverd
chown daemon /var/spool/lpd/pserverd
chgrp daemon /var/spool/lpd/pserverd
chmod 775 /var/spool/lpd/pserverd
3. Add an entry to the host’s /etc/printcap file,
similar to the following:
printer-name:\
:lp=:\
:rm=203.66.191.186:\
:rp=lpt1:\
:lf=/var/spool/lpd/pserverd.log:\
:sd=/var/spool/lpd/pserverd:\
:mx#0:
Lines should be indented with tabs. More than one
printer name can be used, with variants separated by
vertical bars (name1|name2).
The rm= entry should correspond to the IP address
you have assigned to the print server. You can also
use a host name if you have one assigned in the
/etc/hosts file.
The sd= entry should correspond to the spool
directory you created in the previous step.
The rp= entry should correspond to the port name of
the remote printer. The values should be lpt1, lpt2, or

Hawking HWPS12UG Specifications

General

Brand	Hawking
Model	HWPS12UG
Category	Print Server
Language	English