Hawking HWPS12UG User Manual

Double Click the “TCP/IP” icon and the TCP/IP
configuration window will appear.
You can configure the print server to automatically
get its IP address from your networks DHCP server
or manually specify a static print server IP. The
HWPS12UG also has a built-in DHCP server. You
can enable this DHCP server and let it manage your
print server IP addresses for you.
Click the “IP” button to enter the IP setting page. If
you need the print server to automatically get an IP
from your networks DHCP server, select “Auto IP.”
You also can select “Specify IP” to manually assign
“IP Address,” “Subnet Mask,” and “Gateway” for the
HWPS12UG.
Click the “DHCP” button to enter the DHCP server
settings page. You can enable/disable the DHCP
server and assign a range of IP addresses here. The
DHCP server is disabled by default. You will have to
configure a “Start Address,” “End Address,”
“Gateway,” and “DNS” for the HWPS12UG. The
print server will assign a unique IP address for each
client.

Hawking HWPS12UG Specifications

General

Brand	Hawking
Model	HWPS12UG
Category	Print Server
Language	English