If you want to use WEP encryption to protect your
wireless network, you have to select “ON” to enable
the “Wireless Security” function. The wireless
security setting should be the same with other
wireless devices in the same network.
You can select “64 bit” or “128 bit” length
encryption keys. The longer the key length is, the
stronger your security will be, however, the addition
of WEP will effect your data transfer performance.
Enter four key values and select one key as the
default key.
When you finish configuring the wireless security
features of this print server, click “Next” to
configure the IP address of your wireless print server
module.
To Next Page
Loading...
Need help?
General
