Hawking HWREG1 User Manual

Hawking Technologies Hi-Gain Wireless-G Range Extender Configuration
10
4. You can now start to configure the Range Extender.
From a Wireless Computer
1. Make sure your wireless computer is in the same subnet with the Range
Extender. Please refer to the step 1 above for configuring the IP Address and
Sub Mask of the wireless computer.
2. Connect to the Range Extender.
The Range Extender’s default SSID is “HawkingExtender” and the WEP
Encryption function is disabled. Make sure your wireless computer is using the
same E SSID as the Range Extender and associate your wireless computer to the
Range Extender.
3. Enter 192.168.1.235 from Web Browser to get into the Range Extender’s
configuration interface.
4. Enter the user name and password and then press OK button and you are
available to configure the Range Extender now.

Hawking HWREG1 Specifications

General

Brand	Hawking
Model	HWREG1
Category	Extender
Language	English