Wireless LAN Access Point Connection
Chapter 2 Wireless Range Extender
Connection
1. Locate an optimum location for the Wireless Range Extender.
The best location for your Range Extender is usually at the center of your wireless
network, with line of sight to all of your local computers. However, depending on
the application, you may place your Range Extender at any location that is
between your original wireless router or access point and your wireless trouble
spot. Do not place the Range Extender in your desired location yet. You must
first connect it to your network for configuration.
2. Connect the Wireless Range Extender to your router, hub or switch.
Connect one end of standard Ethernet cable to the Range Extender’s LAN Port
and connect the other end of the cable to a switch, a router or a hub. The Range
Extender will then be connected to your existing Network.
3. Connect the DC Power Adapter to the Wireless Range Extender’s Power
Socket.
Only use the power adapter supplied with the Range Extender. Using a different
adapter may damage the product.
The Hardware Installation is complete.
To Next Page
Loading...
Need help?
General
