Hawking HWREG1 User Manual

Introduction
4
Ÿ Antenna Connector (ANT)
This round connection is a standard R everse SMA antenna connector. The
antenna included in your packaging screws on here. Upgradeable to Hi-Gain
antennas.
Ÿ DC Adapter Port
Insert the power jack of the power adapter into this port.
Ÿ LAN Port
The Range Extender’s LAN port is the connector port for connecting the
HWREG1 to your local network or computer during the setup procedure. (Uses
Included Ethernet Cable)
Ÿ Reset
The Reset button allows you to do one of two things.
1) If problems occur with your Range Extender, press the reset button with a
pencil tip (for less than 4 seconds) and the Range Extender will re-boot
itself, keeping your original configurations.
2) If problems persist or you experience critical issues or have forgotten your
password, press the reset button for longer than 4 seconds and the Range
Extender will reset itself to the factory default settings (warning: your
original configurations will be replaced with the factory default settings).

Hawking HWREG1 Specifications

General

Brand	Hawking
Model	HWREG1
Category	Extender
Language	English