Hawking Technologies Hi-Gain Wireless-G Range Extender Configuration
Range Extender. The default password for the Range Extender is 1234.
Note that the password is case-sensitive.
New Password Enter the password (up to 15-digit alphanumeric string) you want to login
to the Range Extender. Note that the password is case-sensitive.
Re-Enter Password Reconfirm the password (up to 15-digit alphanumeric string) you want to
login to the Range Extender. Note that the password is case-sensitive.
IP Address Designate the Range Extender’s IP Address. This IP Address should be
unique in your network. The default IP Address is 192.168.2.1.
Subnet Mask Specify a Subnet Mask for your LAN segment. The Subnet Mask of the
Range Extender is fixed and the value is 255.255.255.0.
Gateway Address The IP address of the default gateway of the subnet that this Range Extender
resides in. It allows this Range Extender be accessed by PC from deferent
subnet to do configuration.
DHCP Server Enable or disable the DHCP Server.
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Range Extender.
DHCP Server Setting
DHCP Server will automatically give your LAN client an IP address. If the DHCP is
not enabled then you’ll have to manually set your LAN client’s IP address.
Parameter Description
Default Gateway IP Specify the gateway IP in your network. This IP address should be
different from the Management IP.
To Next Page
Loading...
Need help?
General
