34
2-6-4 WPA RADIUS
WPA Radius is the combination of WPA encryption method and RADIUS
user authentication. If you have a RADIUS authentication server, you can
check the identity of every wireless client by user database.
When you select ‘WPA RADIUS’ as encryption type, the following
messages will be displayed:
Here are descriptions of every setup item:
WPA Unicast
Cipher Suite
You can select WPA encryption type here. AES is
safer than TKIP, but not every wireless client
supports it. Please refer to the specification of your
wireless client to decide which encryption type you
should use.
Use internal MD5
RADIUS Server
Uses built-in RADIUS Server (refer to Section 2-8)
instead of external RADIUS server. If you check
this box, the value in following three fields will be
ignored.
RADIUS Server IP
address
Please input the IP address of RADIUS
authentication server here.
RADIUS Server
Port
Please input the port number of RADIUS
authentication server here. Default value is 1812.
RADIUS Server
Password
Please input the password of RADIUS
authentication server here.
To Next Page
Loading...
Need help?
General
