Hawking HWREN1 User Manual

36
2-6-5 802.1x Authentication
You can enable 802.1x user identification (based on RADIUS user
authentication server) by checking ‘Enable 802.1x Authentication’ box
when you select ‘Disable’ or ‘WEP’ as encryption type, and the following
message will be displayed:
Here are descriptions of every setup item:
Use internal MD5
RADIUS Server
Uses built-in RADIUS Server (refer to next
Section) instead of external RADIUS server. If you
check this box, the value of internal RADIUS
server fields will be ignored.
Enable 802.1x
Authentication
Enable or disable the use of 802.1x user
authentication.
RADIUS Server IP
address
Please input the IP address of RADIUS
authentication server here.
RADIUS Server
Port
Please input the port number of RADIUS
authentication server here. Default value is 1812.
RADIUS Server
Password
Please input the password of RADIUS
authentication server here.
After you finish with setting, please click ‘Apply’, and the following
message will be displayed:

Hawking HWREN1 Specifications

General

Brand	Hawking
Model	HWREN1
Category	Extender
Language	English