16
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
3. Use correct cutting device for the product and ensure they in
good condition.
4. Keep tight grip on the handles/gripping surface.
5. Maintain this product in accordance with these instructions and
keep it well lubricated (where appropriate).
6. Plan your work schedule to spread any high vibration tool use
across a longer period of time.
Emergency
Familiarise yourself with the use of this product by means of this
instruction manual. Memorise the safety directions and follow them
to the letter. This will help to prevent risks and hazards.
1. Always be alert when using this product, so that you can
recognise and handle risks early. Fast intervention can prevent
serious injury and damage to property.
2. Switch off and disconnect from the power supply if there is any
malfunction. Have the product checked by a qualified specialist
and repaired, if necessary, before you put it into operation again.
Residual Risks
Even if you are operating this product in accordance with all the
safety requirements, potential risks of injury and damage remain.
The following dangers can arise in connection with the structure
and design of this product:
1. Health defects resulting from vibration emission if the product is
being used over long periods of time or not adequately managed
and properly maintained.
2. Injuries and damage to property due to broken application tools
or the sudden impact of hidden objects during use.
3. Danger of injury and property damage caused by flying objects.
To Next Page
