What to do if Hawksmoor Trimmer machine does not cut?
If your Hawksmoor Trimmer isn't cutting, the possible causes include a broken line, a battery that isn't fully charged, a broken motor (indicated by low speed), or grass entangled around the cutting head. You can replace the line, recharge the battery, remove any entangled grass. If the motor is broken, contact a service agent.
Why does my Hawksmoor 95074 fail to operate?
If your Hawksmoor Trimmer isn't working, it might be due to a discharged battery, a battery that's too hot or cold, a broken motor, or damaged internal wiring. Try recharging the battery or allowing it to cool or warm. If the motor is broken or the internal wiring is damaged, contact a service agent.
Why is the cutting time per battery charge too low on my Hawksmoor 95074 Trimmer?
If the cutting time per charge is too low on your Hawksmoor Trimmer, it could be because the battery hasn't been used for a long time, was only charged for a short time, or is defective. Also, grass may be too high. Fully charge the battery, cut grass in stages, or replace the battery.
What to do if Hawksmoor 95074 runs intermittently?
If your Hawksmoor Trimmer runs intermittently, the cause may be a broken motor, a battery that's not fully charged or a defective on/off switch. Try recharging the battery. If the motor is broken or the switch is defective, contact a service agent.
What to do if Hawksmoor 95074 has excessive vibrations/noise?
Excessive vibrations or noise in your Hawksmoor Trimmer can be caused by a defective machine or a line spool that isn't wound well. You can rewind the line spool. If the machine is defective, contact a service agent.
Why is the battery charge indicator continuously lighting on my Hawksmoor Trimmer?
If the battery charge indicator on your Hawksmoor Trimmer is continuously lit, the battery might not be properly inserted, the battery contacts could be contaminated, or the battery might be defective. Make sure the battery is properly inserted into the charger. Clean the battery contacts or replace the battery.
How to fix auto feed that does not work on Hawksmoor 95074?
If the auto feed on your Hawksmoor Trimmer isn't working, it could be due to the cutting line not being wound well or the line being used up. You can manually feed the line. If that doesn't work, remove the spool and rewind the line, or replace it with a new line spool.
What to do if battery charge indicator does not light up on Hawksmoor Trimmer?
If the battery charge indicator on your Hawksmoor Trimmer doesn't light up, the plug of the battery charger may not be properly plugged in, or the socket outlet, mains cable, or battery charger might be defective. Insert the mains plug fully into the socket outlet. Check the mains voltage. If the issue persists, have the battery charger checked by an authorized after-sales service agent.
Covers fundamental safety precautions for using the appliance.
Emphasizes the importance of familiarizing with controls and proper use.
Defines the recommended applications for the grass trimmer.
Step-by-step guide for assembling the product components.
Specific instructions for fitting the protective guard.
To Next Page
General
