4
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
SPECIFICATION
Technical Data
Model ST1904-2
Nominal voltage of product with battery 18V d.c./2.0Ah Li-ion
No-load cutting speed 8000 /min
Cutting width 26cm
Line diameter 1.6mm
Line length 6m
Net weight approx. 2.2 kg
Measured sound pressure level 81.3 dB(A), K=3.0 dB(A)
Guaranteed sound power level 96 dB(A)
Vibrations <2.5 m/s²; K=1.5 m/s²
Battery pack Model B0P-SP07-18ZM
Battery capacity 2.0Ah
Battery charging time Max. 50mins
Battery charger Model B0Q-SP06-20ZB
Battery charger input 220-240V AC, 50/60Hz 65W
Battery charger output 20V d.c. 2.4A
Protection class of charger class II /
Note: The above specifications are the MAXIMUM capacities of the tool. Voltage measured
without workload. Initial battery voltage reaches 20 Volts. Nominal voltage is 18 Volts.
The sound values have been determined according to noise test code given in EN 786, using the
basic standards EN ISO 11201 and EN ISO 3744.
TOOLS REQUIRED
To Next Page
Loading...
