32
www.coreservice.co.uk
Hotline: +44 01904 947568
Email support@coreservice.co.uk
Battery charge
indicator does not light
up.
Plug of battery charger not plugged
in (properly).
Insert mains plug (fully) into the
socket outlet.
Socket outlet, mains cable or
battery charger defective.
Check the mains voltage; have the
battery charger checked by an au-
thorized after-sales service agent.
Auto feed does not
work
Cutting line is not wound well. Manually feed the line, if still cannot
feed out, remove the spool out and
rewind the line.
The line is tangled.
Line is used up. Replace with a new line spool.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR TOOL, PLEASE DO NOT ATTEMPT TO
OPEN OR REPAIR THE TOOL YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD
CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS,
PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE
FOLLOWING PAGE.
To Next Page
Loading...
