Haylou GT1 2022 - User Manual

Haylou GT1 2022 manual
Wear
Gently insert the handset
into
ear canal, set the handset to
most comfortable wearing
condition.
When making a call, set the
microphone towards
mouth for a better speaking
experience.
Turn on
1. Remove the headphones from the docking station.
2. If the headphones do not turn on automatically, press the multi-function button
for 1.5 seconds
Shutdown
1. The headphones will automatically turn off when you put them into the
docking station 2. Outside the docking station, press the multi-function
button for 4.5 seconds
Pairing
Take out both earphones from the charging case at the same time, open the Bluetooth
on the device and search for "Haylou GT1 2022", finally click it to complete the
connection. Put the headphones back into the charging case and repeat the above
operation if the connection fails. After the first connection, the headphones can be

Summary

Getting Started and Basic Operations

Turn On Headphones

Instructions on how to power on the headphones, including automatic and manual methods.

Shutdown Procedure

Steps for turning off the headphones, both automatically and manually.

Pairing and Connection

Guide to pairing the headphones with a device via Bluetooth.

Advanced Functions and Settings

Manual Connection and Mode Switching

Details on manual connection and switching between mono and stereo modes.

Music and Call Controls

Explains button functions for music playback, call handling, and incoming calls.

Voice Assistant and Low Latency

Instructions for activating voice assistant and managing low latency mode.

Factory Reset Procedure

Steps to reset the headphones to factory default settings.

Troubleshooting Common Issues

Earphone Muting

Solutions for one earphone being muted.

Charging Problems

Guidance on resolving issues related to headphone charging.

Disconnection Issues

Troubleshooting automatic disconnection from the mobile phone.

Overview

1. Function Description
2. Usage Features
3. Wearing the Earbuds
4. Powering On/Off
5. Pairing
6. Manual Connection
7. Switching Between Mono and Stereo Mode
8. Controls
9. Call Management (During an Incoming Call while on another Call)
10. Maintenance Features
11. Factory Settings Reset
12. Common Problems and Troubleshooting

This document outlines the usage and features of the Haylou GT1 2022 earbuds, providing instructions for comfortable wear, basic operations, and troubleshooting.

Function Description

The Haylou GT1 2022 earbuds are designed for wireless audio playback and hands-free calling. They offer both stereo and mono modes, allowing users to choose between using both earbuds for an immersive experience or a single earbud for convenience and awareness of surroundings. A key feature is the low latency mode, which can be activated for improved synchronization, particularly useful for gaming or video consumption. The earbuds integrate with a voice assistant, providing hands-free control over various device functions.

Usage Features

Wearing the Earbuds:

To ensure optimal sound quality and comfort, gently insert each earbud into your ear canal. Adjust the earbud until it sits comfortably and securely. When making calls, position the microphone towards your mouth to enhance voice clarity for the recipient.

Powering On/Off:

• Turn On: The earbuds automatically power on when removed from their docking station. If they do not turn on automatically, press the multi-function button on each earbud for 1.5 seconds.
• Turn Off: The earbuds will automatically turn off when placed back into the docking station. If outside the docking station, press the multi-function button for 4.5 seconds to manually power them off.

Pairing:

For initial pairing, remove both earbuds from the charging case simultaneously. Enable Bluetooth on your device and search for "Haylou GT1 2022." Click on the device name to complete the connection. If the connection fails, place the earbuds back into the charging case and repeat the process. After the first successful connection, the earbuds will automatically connect to the last paired device when Bluetooth is enabled on that device.

Manual Connection:

If the earbuds are off, manually turn both of them on. Allow 2-3 seconds for them to connect to each other. Once connected, enable Bluetooth on your device, and the earbud's light will slowly flash white, indicating it's ready to connect.

Switching Between Mono and Stereo Mode:

After successfully connecting both earbuds, they will be in stereo mode. To switch to mono mode, place one earbud back into the charging case to turn it off. The remaining earbud will then operate in mono mode. To restore stereo mode, simply take the earbud out of the case again.

Controls:

The earbuds feature a multi-function button for various operations:

• Short Press: Play or pause music.
• Double-Press (Left Earbud): Play the previous song.
• Double-Press (Right Earbud): Play the next song.
• Double-Press (Either Earbud): Answer or end a call.
• Triple Press (Left Earbud): Activate the voice assistant.
• Triple Press (Right Earbud): Turn on or off the low latency mode.

Call Management (During an Incoming Call while on another Call):

• Hold Current Call and Answer Second Call: Double touch the multi-function button.
• Hold Current Call and Reject Second Call: Hold the multi-function button for approximately 1.5 seconds.
• Switch Between Two Calls: Double touch the multi-function button.

Maintenance Features

Factory Settings Reset:

If you encounter persistent issues, a factory reset can often resolve them:

1. Place both earbuds into the charging case, ensuring the case has sufficient power.
2. Clear the "Haylou GT1 2022" pairing record from your phone's Bluetooth settings.
3. Turn off Bluetooth on your phone.
4. Attempt the pairing process again as described above.

Common Problems and Troubleshooting:

• One Earbud is Muted:

  • Try placing the muted earbud back into the charging case and then taking it out again.
  • If the issue persists, perform a factory reset as described above.

• Earbuds Cannot Be Charged:

  • Verify that the charging case itself has sufficient power.
  • Gently wipe the charging contacts on both the earbuds and the charging case with a dry cloth or cotton swab to ensure good contact.

• Earbuds Do Not Automatically Disconnect from Mobile Phone:

  • Check if the charging case has sufficient power. The earbuds will not automatically turn off and disconnect from your mobile phone if the charging case is not powered.

Haylou GT1 2022 Specifications

General

Model	Haylou GT1 2022
Category	Headphone
Bluetooth Version	5.2
Driver Size	7.2 mm
Frequency Response	20 Hz - 20 kHz
Battery Life (Earbuds)	5 hours
Charging Time	1.5 hours
Water Resistance	IPX4
Weight (per Earbud)	3.9g
Weight (Charging Case)	35g
Connection Range	10 meters
Microphone	Yes
Touch Controls	Yes
Voice Assistant Support	Yes