To Next PageTo Next Page
Need help?Do you have a question about the Hayward AQUA RITE pro and is the answer not in the manual?
General| Product Type | Salt Chlorination System |
|---|---|
| Model | Aqua Rite Pro |
| Pool Size | Up to 40, 000 gallons |
| Salt Requirement | 2700 - 3400 ppm |
| Chlorine Output | 1.45 lbs/day |
| Power Supply | 120V/240V |
| Voltage | 120V/240V |
| Super Chlorination | Yes |
| Reverse Polarity | Yes |
| Warranty | 3 years |
| Control | Digital |
| Plumbing Size | 2" |
| pH Control | Optional |
| ORP Control | Optional |
Essential safety guidelines and warnings for operating the AquaRite Pro unit.
Explains the AquaRite Pro's function, models, and integration with chemistry kits.
Guide on calculating and adding salt based on pool volume.
Steps for preparing pool water and selecting a mounting location.
Guidance on plumbing the flow switch and electrolytic cell.
How to wire the unit to the filter pump timer and electrical supply.
Instructions for proper grounding and bonding of the unit.
Lists and explains common "Check System" errors like Inspect Cell, Low Salt, etc.
Details errors related to CSM, probes, and sensors.
