Hayward Aqua Plus® User Manual

Quarterly Monthly Weekly
Free Chlorine 1.0 - 3.0 ppm
pH 7.2 - 7.8
Raise desired output % to
increase, lower desired output %
to decrease -OR- increase or
decrease pump filtration time.
Too low - add soda ash.
Too high - add muriatic acid
Alkalinity 80 - 120 ppm
Salt 2700 - 3400 ppm Add salt as required to increase.
Add baking soda to increase.
Stabilizer 60 - 80 ppm Add cyanuric acid to increase.
Calcium 200 - 400 ppm Add calcium to increase.
Electrolytic Cell inspect & clean Refer to section in manual.
TEST IDEAL RANGE ADJUSTMENT REQUIRED
Drain and add water to decrease.
Add acid as required to decrease.
Automation and Chlorination
Operation Manual
for models
PL-PLUS
PL-PLUS-20
Aqua Plus
®
092360D RevG
Copyright © 2010 Hayward
www.hayward.com
620 Division St.
Elizabeth, NJ 07207

Hayward Aqua Plus® Specifications

General

Brand	Hayward
Model	Aqua Plus®
Category	Swimming Pool Filter
Language	English

Summary

Important Safety Instructions

General Safety Precautions

Essential safety guidelines and warnings for operating the Aqua Plus system.

System Overview and Operation

System Components and Functionality

Describes the Aqua Plus controller's components, connections, and overall purpose.

Default Display Operation

Explains how the main display shows system information and how to navigate it.

Manual Equipment Control

Instructions for manually operating the filter pump, lights, valves, and service functions.

Automatic System Operation

Guide to using programming buttons and setting up automated system operations.

Settings and Configuration

Settings Menu

Details on setting temperatures, chlorinator output, time, display, and beeper.

Timers Menu

How to program timeclocks and countdown timers for various equipment.

Configuration Menu

Configuring Pool/Spa, Filter, Heater, Solar, Lights, Aux, and Valve settings.

Maintenance and Water Chemistry

Maintenance Menu

Procedures for pH calibration and cleaning of the electrolytic cell probes.

Quick "How To" Guide

Step-by-step instructions for spa operation, heater settings, and chlorinator output.

Chlorinator Operation / Water Chemistry

Recommended water chemistry levels, saturation index, and salt requirements.

Troubleshooting and Warranty

Troubleshooting and Diagnostic Information

Using service mode and understanding system check indicators and diagnostic menus.

Limited Warranty

Details of the product warranty, coverage periods, and exclusions.