To Next PageTo Next Page
Need help?Do you have a question about the Hayward Aqua Rite® and is the answer not in the manual?
Summarizes recommended levels for salt, pH, alkalinity, and stabilizer.
Details recommended salt levels, types of salt, and how to add/remove salt.
Guides on setting turbo cell type, desired output, salt display, and temperature.
Covers cell inspection, cleaning, winterizing, and spring start-up procedures.
Summarizes weekly, monthly, and quarterly maintenance tasks and ideal ranges.
Explains the AUTO, SUPER CHLORINATE, and OFF positions of the main switch.
Details the meaning of various status LEDs like POWER, GENERATING, NO FLOW, etc.
Outlines steps for balancing pool water chemistry before system activation.
Provides guidelines for physically mounting the Aqua Rite control enclosure.
Details how to connect the flow switch and electrolytic cell to the pool plumbing.
Covers input power connections, bonding, and cell/flow switch cable connections.
Explains wiring for connecting with Hayward/Goldline, Pentair, and Polaris controls.
Lists the information available through sequential diagnostic button pushes.
Addresses issues like no power, flashing LEDs, no chlorine, and error messages.
Summarizes recommended levels for salt, pH, alkalinity, and stabilizer.
Details recommended salt levels, types of salt, and how to add/remove salt.
Guides on setting turbo cell type, desired output, salt display, and temperature.
Covers cell inspection, cleaning, winterizing, and spring start-up procedures.
Summarizes weekly, monthly, and quarterly maintenance tasks and ideal ranges.
Explains the AUTO, SUPER CHLORINATE, and OFF positions of the main switch.
Details the meaning of various status LEDs like POWER, GENERATING, NO FLOW, etc.
Outlines steps for balancing pool water chemistry before system activation.
Provides guidelines for physically mounting the Aqua Rite control enclosure.
Details how to connect the flow switch and electrolytic cell to the pool plumbing.
Covers input power connections, bonding, and cell/flow switch cable connections.
Explains wiring for connecting with Hayward/Goldline, Pentair, and Polaris controls.
Lists the information available through sequential diagnostic button pushes.
Addresses issues like no power, flashing LEDs, no chlorine, and error messages.
General| Salt Level | 2700-3400 ppm |
|---|---|
| Salinity Range | 2500 - 4500 ppm |
| Type | Salt Chlorinator |
| Voltage | 120V/240V |
| Flow Rate | 20-80 GPM |
| Pool Size | Up to 40, 000 gallons |
| Warranty | 3 years |
