To Next PageTo Next Page
Need help?Do you have a question about the Hayward Aqua Trol AQ-TROL-HP-TL and is the answer not in the manual?
General| Model | AQ-TROL-HP-TL |
|---|---|
| Pool Size | Up to 18, 000 gallons |
| Voltage | 120V/240V |
| Warranty | 1 year limited |
| Type | Salt Chlorination System |
| Salt Requirement | 2700-3400 ppm |
| Weight | 18 lbs |
Lists different Aqua Trol models and their connection options.
Explains the Saturation Index for water balance and provides a calculation method.
Details the recommended type of salt (99% pure NaCl) and types to avoid.
Provides instructions on how to add salt and the method for lowering salt concentration.
Explains how to set the timer for the pool filter pump operation.
Describes the manual switch for turning the pump on or off.
Details the functions of the AUTO, SUPER CHLORINATE, and OFF positions.
Explains how to adjust the chlorine generation level using the knob.
Describes the meaning of the POWER, GENERATING, and SUPER CHLORINATE LEDs.
Provides instructions for inspecting, cleaning, and servicing the electrolytic cell.
Details the procedure for mild acid washing of the cell for stubborn deposits.
Explains how to prepare the system for freezing temperatures to prevent damage.
Provides guidance on starting up the system after winter storage.
Outlines steps for preparing pool water before installing the unit.
Describes requirements for mounting the Aqua Trol control unit.
Details the plumbing for hose or rigid PVC pipe installations.
Explains the specific plumbing for return jet installations.
Describes how to connect the unit to the power supply.
Explains the bonding procedure for safety.
Details the rating and connection for the pump output.
Describes how the cell and flow switch connect to the control unit.
Lists information displayed by the diagnostic button.
Provides solutions for common operational issues and error indicators.
Lists conditions that void or are not covered by the warranty.
