Hayward Pro Logic® User Manual

Automation and Chlorination
Operation Manual
for models
PL-PS-4 PL-PS-8-V
PL-PS-8 PL-PS-16-V
PL-PS-16
Quarterly Monthly Weekly
Free Chlorine 1.0 - 3.0 ppm
pH 7.2 - 7.8
Raise desired output % to
increase, lower desired output %
to decrease -OR- increase or
decrease pump filtration time.
Too low - add soda ash.
Too high - add muriatic acid
Alkalinity 80 - 120 ppm
Salt 2700 - 3400 ppm Add salt as required to increase.
Add baking soda to increase.
Stabilizer 60 - 80 ppm Add cyanuric acid to increase.
Calcium 200 - 400 ppm Add calcium to increase.
Electrolytic Cell inspect & clean Refer to section in manual.
TEST IDEAL RANGE ADJUSTMENT REQUIRED
Drain and add water to decrease.
Add acid as required to decrease.
Pro Logic
092331D RevG
Copyright © 2010 Hayward
www.hayward.com
620 Division St.
Elizabeth, NJ 07207

Hayward Pro Logic® Specifications

General

Category	Water Filtration Systems
Automation	Yes
Heater Control	Yes
Pump Control	Yes
Lighting Control	Yes
Salt Level Monitoring	Yes
Display	LCD
Communication Protocol	Proprietary
Enclosure Rating	NEMA 3R
pH Control	Yes
ORP Control	Yes
Remote Control	Yes
WiFi Connectivity	Optional
Voltage	120/240V
Number of Relays	4 to 8
Compatibility	Hayward

Summary

Safety Instructions

General Safety Precautions

Essential safety warnings and operational instructions for the Pro Logic system.

System Overview and Operation

System Overview and Components

Description of the Pro Logic system, its main unit, and expansion units.

Automation and Chlorination

How the Pro Logic automates pool functions and chlorination processes.

Manual System Operation

Procedures for manually controlling pool equipment via the Pro Logic.

Automatic System Operation

Guides on programming automatic functions and schedules for the system.

Configuration and Settings

Settings, Timers, and Group Functions

Adjusting parameters, programming timeclocks, and creating group functions.

Configuration Menus

Initial system setup, output assignments, and feature enablement.

Component Configuration

Detailed setup for heaters, solar, lights, valves, and other components.

Water Chemistry, Maintenance, and Troubleshooting

Water Chemistry Management

Understanding ideal chemical levels and balancing pool water.

Salt Level Management

Adding and maintaining correct salt levels for chlorinator function.

System Maintenance Procedures

Procedures for cell cleaning, winterizing, and spring start-up.

Troubleshooting and Diagnostics

Using service mode, check system indicators, and diagnostic menus.

Warranty Information

Limited Warranty Terms

Details on warranty coverage, terms, and exclusions.