To Next PageTo Next Page
Need help?Do you have a question about the Hayward Pro Logic PL-P-4-CUL and is the answer not in the manual?
General| Category | Water Filtration Systems |
|---|---|
| Brand | Hayward |
| Model | Pro Logic PL-P-4-CUL |
| Maximum Amperage | 20 A |
| Number of Relays | 4 |
| Voltage | 120V/240V |
| Compatibility | Hayward pool equipment |
| Certification | CUL |
| Type | Pool Automation System |
Details how to add salt to achieve the optimal 3200 PPM level for chlorination.
Describes the required components and models for adding chlorination.
Explains the function and integration of the ORP and pH sensing kit.
Instructions for plumbing the electrolytic cell after the filter and heater.
Details the installation of the flow switch for safety before chlorine generation.
Instructions for connecting the 100A service from the main panel to the Pro Logic subpanel.
Requirements for grounding the Pro Logic and bonding to the pool system.
Lists suitable circuit breakers and wiring considerations for installation.
Specifies the 120VAC power requirement for the Pro Logic logic and chlorinator.
Details wiring for pool equipment using Pro Logic relays rated for 3HP/30A.
Details connecting the Pro Logic to gas or heat pumps with 24V control circuits.
Details VSP communication wiring and address configuration.
Configuration options for enabling/disabling the chlorinator function.
How to select the correct chlorinator cell type for system compatibility.
Guides setup of AQL-CHEM for ORP and pH sensing.
Settings for pool-only, spa-only, or pool/spa operation with valve control.
Settings for filter pump type (1-speed, 2-speed, variable speed).
Configuration for 2-speed and variable speed pump operation.
Enables or disables freeze protection for equipment.
Activates lights relay for freeze protection based on air temperature.
Accesses configuration options for the Aux1 output.
Activates Aux1 relay for freeze protection.
Checklist of completed tasks before initial Pro Logic startup.
Steps to verify Pro Logic heater control functionality.
