To Next PageTo Next Page
Need help?Do you have a question about the Hayward Pro Logic PL-PS-4 and is the answer not in the manual?
General| Brand | Hayward |
|---|---|
| Model | Pro Logic PL-PS-4 |
| Category | Water Filtration Systems |
| Language | English |
Emphasizes the importance of reading and adhering to all safety guidelines provided.
Instructs users to retain safety instructions for future reference.
Details the Pro Logic's capability to control pool equipment automatically.
Describes the standard information displayed on the Pro Logic control keypad.
Explains how to interpret and customize output labels for pool equipment.
Details manual operation of the pool filter pump, including single and dual speed.
Covers manual control of lighting and auxiliary outputs.
Explains how to manually operate pool and spa diverter valves.
Describes manual control of pool and spa heaters.
Details how to turn off all system outputs manually.
Explains how to enter and exit service modes for maintenance.
Guides users on operating the control panel for programming functions.
Allows adjustment of desired spa temperatures and related settings.
Allows adjustment of desired pool temperatures and related settings.
Configure priority between conventional and solar heaters.
Adjusts desired pool and spa solar temperatures.
Configure speeds for variable speed pumps connected to the system.
Controls the super chlorination function for enhanced sanitization.
Sets the desired chlorine generation output for pool and spa.
Configure day/time, backlight, and beeper settings.
Guides on teaching wireless remotes to the Pro Logic system.
Sets the wireless channel for remote communication.
Programs automatic on/off times for the pool filter pump.
Programs automatic on/off times for the spa filter pump.
Sets schedules for auxiliary outputs like lights or cleaners.
Programs automatic on/off times for control valves.
Sets the duration for the super chlorination cycle.
Explains how to assign multiple functions to a single button.
Enables and configures the chlorinator, salt display, and cell type.
Sets up the system for ORP and pH sensing with the optional kit.
Configures system operation modes for pool, spa, or both.
Sets up heater functions, names, cooldown, and extend features.
Configures solar heating options, including extend and priority.
Customizes lights functions, names, interlocks, and group assignments.
Configures auxiliary outputs for various functions like cleaners or waterfalls.
Sets up control valves for functions like solar heating or water features.
Maps buttons on spa side remotes to Pro Logic functions.
Guides the user through calibrating the pH probe.
Provides instructions for cleaning the ORP and pH probes.
Step-by-step instructions for manual spa operation.
Steps to set up automatic spa operation using timeclocks.
Instructions for setting desired heater temperatures or turning off.
Guide on adjusting the chlorine generation output.
How to activate and deactivate the super chlorination feature.
Instructions for programming timed operations for outputs.
How to set up timed operations for specific functions.
Procedure for placing the system into or out of service mode.
Recommends balancing pool chemistry before activating chlorinator.
Summarizes recommended levels for pool chemicals.
Explains how to calculate and maintain water balance using the saturation index.
Guides on determining and adding the correct salt level.
Specifies the recommended type of salt for the system.
Provides instructions for adding salt to the pool.
Details procedures for inspecting and cleaning the electrolytic cell.
Instructions for preparing the system for freezing temperatures.
Guidance for bringing the system online at the start of the season.
Explains how to use service modes for manual control and diagnostics.
Lists common system errors indicated by the CHECK SYSTEM LED.
Provides detailed system information for troubleshooting.
