Hayward CL200 User Manual

Part No ISCLSERIES Rev: B
SERIES CL100/110
SERIES CL200/220
AUTOMATIC CHLORINE FEEDERS
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions s
h
ou
ld
a
l
ways
b
e fo
ll
owe
d
, inc
l
u
d
ing t
h
e fo
ll
owing: Fai
l
ure to fo
ll
ow instructions
can cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death, serious
injury, or major property damage.
The NOTICE label indicates special instructions that are important but not related to hazards.
by
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 351.5400
www.haywardpool.com

Hayward CL200 Specifications

General

Brand	Hayward
Model	CL200
Category	Lighting Equipment
Language	English

Summary

Important Safety Instructions

Safety Alert Symbols and Definitions

Explains safety symbols like DANGER, WARNING, CAUTION, and NOTICE to alert users to potential hazards.

Suction Entrapment Hazards and Prevention

Details risks of hair, limb, body, and mechanical entrapment from suction outlets and measures to prevent them.

Electrical Safety and Grounding

Covers critical electrical safety, including wiring, grounding, GFCI protection, and bonding requirements.

Chemical Handling and Usage Warnings

Warns against mixing chemicals, using wrong tablet types, and improper chemical addition methods.

General Operational and Equipment Safety

Covers warnings related to system pressure, filter valve operation, children's access, and plumbing compatibility.

Installation Guide

CL-100/200 Installation Steps

Provides step-by-step instructions for installing the CL-100/200 automatic chlorine feeder in pool plumbing.

CL-110/220 Installation Steps

Details the installation process for the CL-110/220 chlorine feeder, including pipe connections and fittings.

Directions for Use

General Use and Initial Setup

Guides on preparing pool water, checking chlorine levels, and initial chlorinator adjustments.

Refilling the Chlorinator

Step-by-step procedure for safely shutting down, opening, refilling, and restarting the chlorine feeder.

Maintenance and Winterizing

O-Ring Replacement Procedures

Instructions for replacing O-rings on CL100/110 and CL200/220 models.

Flow Control Valve Handle

Guides on removing and installing the flow control valve handle for proper operation.

Winterizing and Vacuuming

Procedures for preparing the unit for freezing temperatures and safe vacuuming practices.

Lubrication Recommendations

Specifies the correct lubricant for O-rings and other parts to ensure longevity.

Spare Parts Catalog

CL100 Spare Parts

Lists part numbers and descriptions for common replacement parts for the CL100 model.

CL200 Spare Parts

Lists part numbers and descriptions for common replacement parts for the CL200 model.

CL110 Spare Parts

Lists part numbers and descriptions for common replacement parts for the CL110 model.

CL220 Spare Parts

Lists part numbers and descriptions for common replacement parts for the CL220 model.

Product Registration and Warranty

Warranty Card Registration

Instructions for registering the product warranty online or by mail for service and support.