To Next PageTo Next PageWhat to do if my Hayward Lighting Equipment has an oversized pump?
If your Hayward Lighting Equipment experiences excessive flow rates and/or pressures due to an oversized pump, you should re-size the pump. This issue may arise from flattened pleats or folds, embedded dirt or debris in the filter material, a broken internal core, or split end plates of the element.
General| Brand | Hayward |
|---|---|
| Model | XStream CC1000 |
| Category | Lighting Equipment |
| Language | English |
Explains the safety-alert symbol, WARNING, CAUTION, and NOTICE labels for hazard communication.
Emphasizes following basic safety precautions to prevent severe injury or death.
Details risks of hair, limb, body, evisceration, and mechanical entrapment due to suction outlets.
Covers risks of electric shock, proper grounding, bonding, and GFCI requirements.
Warns about risks of hyperthermia, temperature limits, and precautions for hot tub use.
Introduces the XStream Filtration Series and its intended use for above-ground pools.
Lists model numbers, filtration area, flow rate, pressure, clearance, and key product features.
Provides instructions for plumbing connections, including recommended materials and techniques.
Step-by-step guide for initial system startup, including priming and air bleeding.
Details how to remove, clean, and reassemble the cartridge element.
Covers routine cleaning, vacuuming, winterization, and preventative checks.
Identifies common problems like clogged elements or oversized pumps and their solutions.
Lists all replacement parts with reference numbers, part numbers, and required quantities.
Visual representation of head loss versus flow rate for XStream filter models.
Outlines the terms and conditions of the Hayward Pool Products Limited Warranty.
Instructions for completing product registration either by mail or online.
