EasyManua.ls Logo

Hayward DEP60 User Manual

Hayward DEP60
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ISDE2423 Rev D
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
1
Hayward D.E. Filter
Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions should always be followed, including the following: Failure to follow instructions
can cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING
warns about hazards that
could
cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION
warns about hazards that
will
or
can
cause minor or moderate personal injury and/or property
damage and if ignored presents a potential hazard. It can also make consumers aware of actions that are
unpredictable and unsafe.
The
NOTICE
label indicates special instructions that are important but not related to hazards.
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07207
Phone: (908) 355-7995
www.hayward.com
Contents
Product Warnings……………….…2
Introduction……….……..…..…..…4
Installation……….……………..……4
Starting Pump and Filter…………5
Filter Control Valve…………………6
Winterizing…………………………….9
Replacement Parts………..………10
Warranty..……………………..……11
Registration……………….………….12
Question and Answer IconNeed help?

Do you have a question about the Hayward DEP60 and is the answer not in the manual?

Hayward DEP60 Specifications

General IconGeneral
ModelDEP60
Max Pressure50 psi
Air Relief ValveYes
Drain PlugYes
TypeD.E. (Diatomaceous Earth) Filter
Filter Area60 sq ft

Summary

General Safety Instructions

Suction Entrapment Hazards

Types of Entrapment Hazards

Details specific suction entrapment hazards like hair, limb, body, evisceration, and mechanical.

System Hazards and Electrical Safety

Hazardous Pressure and Separation Risks

Warns about risks from system pressure and potential component separation.

Electrical Shock Prevention

Details precautions against electrical shock hazards during installation and operation.

General Information and Installation

Installation Requirements

Outlines the necessary steps, site selection, and precautions for filter installation.

Starting and Operating the Filter

Initial Pump and Filter Start-up

Guides on the correct procedure for starting the system pump and filter.

Pre-Coating and Filtering Process

Explains how to pre-coat the filter with D.E. and the normal filtering operation.

Filter Control Valve and Maintenance

Warranty and Registration Information

Related product manuals