¾In Process Mapping
• As the unit encounters large changes in pool configuration it will revert to the
mapping process for a few passes to adjust itself to the change in shape.
• Mapping will take several passes and is undetectable from normal operation.
¾Navigation
• The unit navigates itself primarily by running in a diagonal direction at the water line.
• This is the key to complete pool coverage.
¾Shutdown
• The machine will shut down after 4 hours for the standard TigerShark.
• TigerShark QC will shutdown after 90 minutes if the Quick Clean LED is
illuminated, or after 4 hours if “Full Cycle” is selected.
Page 37
Troubleshooting
• The power supply will continue to supply low voltage to the unit and the diagnostic
memory will continue to record hours until the power switch is turned off.
To Next Page
Loading...
