Hayward OmniLogic Installation Manual

USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
IMPORTANT SAFETY INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should
always be followed, including the following:
• READ AND FOLLOW ALL INSTRUCTIONS
• WARNING-Toreducetheriskofinjury,donotpermitchildrentousethisproduct,
unless they are closely supervised at all times.
• Awireconnector(bondinglug)isprovidedonthisunittoconnectaminimumNo.
8AWG(8.4mm²)(No.6AWGinCanada)solidcopperconductorbetweenthis
unit and any metal equipment, metal enclosures of electrical equipment, metal
waterpipe,orconduitwithin5feet(1.5m)oftheunit.
• AgreencoloredterminaloraterminalmarkedG,GR,Ground,orGroundingislo-
catedinsidethesupplyterminalboxorcompartment.Toreducetheriskofelectric
shock,thisterminalmustbeconnectedtothegroundingmeansprovidedinthe
electrical supply service panel with a continuous copper wire equivalent in size
the circuit conductors supplying this equipment.
• WARNING:DisconnectallACpowerduringinstallation.
• WARNING:Waterinexcessof100degreesFahrenheitmaybehazardousto
your health.
• OnebondinglugforUSmodels(twoforCanadianmodels)isprovidedonthe
externalsurface.Toreducetheriskofelectricshock,connectthelocalcommon
bonding grid in the area of the swimming pool, spa, or hot tub to these terminals
withaninsulatedorbarecopperconductornotsmallerthan8AWGUS/6AWG
Canada.
• SAVE THESE INSTRUCTIONS

Hayward OmniLogic Specifications

General

Connectivity	Wi-Fi, Ethernet
Type	Automation System
Control	Mobile App, Web
Expandability	Modular, Supports Multiple Devices
Compatibility	Hayward pool equipment