Hayward OmniLogic - Quick Reference Guide Manual

Qu i c k Re fe re n ce G u id e
Wired Network Setup
MSP
Ethernet Cable to
Router LAN Port
Computers,
and other devices
Internet
Connection
Home Router
1. Connect MSP to Home Router
2. Congure wired connection by selecting:
Cong>Wired Networking>
Note: Network status (top left)
should be in “ON” position
For dynamic (DHCP):
Note: Network status (top left)
should be in “ON” position
For static (Fixed IP):
conrm and save with check mark
select “dynamic” on text bar
select “static” on text bar
enter IP for each eld
conrm and save with check mark