Need help?Do you have a question about the Hayward RS2000 and is the answer not in the manual?
General| Brand | Hayward |
|---|---|
| Model | RS2000 |
| Category | Swimming Pool Pump |
| Language | English |
Details pump GPM vs. total resistance to flow for various models.
Explains safety alert symbols (WARNING, CAUTION, NOTICE) and their meanings.
Lists essential safety measures to follow during installation and operation.
Covers electrician requirements, GFCI, bonding for safety, and notes for electricians.
Provides guidelines to minimize entrapment hazards like hair, limb, body, and mechanical.
Introduces the manual and stresses the importance of following instructions for safe operation.
Highlights the advantages and features of the RS Replacement Series Pump.
Guides on choosing the optimal location and mounting base for the pump.
Chart for maximum recommended system flow rate based on pipe size.
Instructions on using Teflon tape, types of fittings, and pool/spa standards.
Details grounding, bonding, wiring, and provides motor specs for different models.
Covers electrical connections, voltage considerations, grounding, bonding, and GFCI installation.
Essential checks before initial pump operation, including pressure testing requirements.
Step-by-step instructions for starting and priming the pump safely.
Covers cleaning strainer baskets, motors, and replacing seals.
Procedures for protecting the pump from freezing and long-term storage.
Initial steps and safety warnings for replacing the shaft seal.
Instructions for removing the impeller, ceramic seat, and spring seal.
Guide for reinstalling the impeller, diffuser, motor assembly, and housing.
Visual illustration of pump components with reference numbers for identification.
Detailed list of all available replacement parts with part numbers and descriptions.
Continuation of the parts list with additional components and their specifications.
Table linking specific pump models to their corresponding motor, diffuser, and impeller part numbers.
Solutions for problems related to motor operation and pump priming.
Guidance on resolving low flow and issues with suction lines or clogs.
Solutions for reduced water flow and causes of pump noise.
Section for recording installation date and pump details for warranty purposes.
Outlines the terms, duration, coverage, and limitations of the product warranty.
Instructions for obtaining warranty repairs or replacements and contacting service centers.
To Next Page