Hayward Max-Flo VS™ User Manual

IS2300VSP Rev C
Hayward Pool Products
620 Division St, Elizabeth, NJ 07201
Phone: (908) 351-5400
www.haywardpool.com
VEUILLEZ VOUS REFERER AU SITE WEB HAYWARDPOOL.CA POUR LES INSTRUCTIONS EN FRANCAIS
Max-Flo VS
™
Owner’s Manual
Model SP2300VSP
Max-Flo VS Pump
The Hayward Max-Flo VS is specifically engineered for the demanding requirements of today’s in-ground
swimming pool/spa that is equipped with large capacity filters, heaters, and pool cleaning equipment.
The totally enclosed, permanent magnet motor combined with its advanced hydraulic design provides
unparalleled energy savings. Max-Flo VS is designed for pools of all types and sizes, featuring a 1 1/2” x
2” union connection to match a variety of plumbing configurations and a cam and ramp strainer cover
that seals with less than a quarter turn. The Max-Flo VS is an ideal choice for both new construction or
as a replacement pump.
NOTE - To prevent potential injury and to avoid unnecessary service calls, read this manual carefully and
completely.
SAVE THIS INSTRUCTION MANUAL

Hayward Max-Flo VS™ Specifications

General

Voltage	230V
Horsepower	1.65 HP
Control	Digital
Energy Star Certified	Yes
Manufacturer	Hayward
Port Size	2"
Frequency	50/60 Hz
Maximum Flow Rate	90 GPM
Warranty	3 Years
Wet End Material	Thermoplastic
Motor Frame	56J
Speed Range	600 to 3450 RPM
Union Connections	1.5 in x 2 in
Type	Variable Speed
Motor Type	Permanent Magnet
Connection Size	1.5 in x 2 in

Summary

Important Safety Instructions

General Information and Specifications

Primary Features

Highlights key capabilities and benefits of the pump.

Product Dimensions

Provides physical measurements and specifications.

Energy Efficiency Overview

Details power consumption and energy savings.

Installation and Wiring Procedures

Pump Location and Mounting

Guidance on optimal placement and secure installation.

Plumbing and Pipe Sizing

Best practices for piping and flow rate considerations.

Electrical Grounding and Bonding

Essential steps for safe electrical grounding and bonding.

Startup and Operation Guide

Prior to Start-Up

Checks and preparations before initial pump operation.

Starting and Priming the Pump

Process for initiating pump operation and priming.

User Interface and Configuration

Understanding the control panel and setting up the pump.

Maintenance and Troubleshooting

Routine Maintenance Tasks

Regular checks and cleaning for pump longevity.

General Problems and Solutions

Common issues, causes, and fixes for pump operation.

Parts and Warranty Information

Replacement Parts Listing

Catalog of available parts for the pump.

Product Warranty Details

Information regarding the manufacturer's warranty.