EasyManua.ls Logo

Hayward TigerShark® User Manual

Hayward TigerShark®
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ISRC10202 Rev: C
TigerShark
®
SERIES
Owner’s Manual
ROBOTIC POOL CLEANER
Models: TigerShark, TigerShark QC, TigerShark Plus, TigerShark2, TigerShark2 Plus
IMPORTANT SAFETY INSTRUCTIONS
Basic safety precautions should always be followed, including the following: Failure to follow instructions can
cause severe injury and/or death.
This is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for
one of the following signal words and be alert to the potential for personal injury.
WARNING warns about hazards that could cause serious personal injury, death or major property
damage and if ignored presents a potential hazard.
CAUTION warns about hazards that will or can cause minor or moderate personal injury and/or
property damage and if ignored presents a potential hazard. It can also make consumers aware of actions that
are unpredictable and unsafe.
The
NOTICE
label indicates special instructions that are important but not related to hazards.
by
Hayward Pool Products
620 Division Street, Elizabeth, NJ 07201
Phone: (908) 351.5400
www.haywardnet.com
Question and Answer IconNeed help?

Do you have a question about the Hayward TigerShark® and is the answer not in the manual?

Hayward TigerShark® Specifications

General IconGeneral
Pool TypeIn-Ground
TypeRobotic
Filter TypeCartridge filter
Cable Length50 ft
Power Supply120V
Pool SizeUp to 20 x 40 ft

Summary

IMPORTANT SAFETY INSTRUCTIONS

Safety-Alert Symbol and Signal Words

Explains safety symbols (Warning, Caution, Notice) and their meanings for hazard awareness.

Suction Entrapment Hazards

Details hazards like hair, limb, body suction, evisceration, and mechanical entrapment.

HAYWARD Pool Products Limited Warranty

Warranty Coverage and Limitations

Details the 1-year/3-year warranty, exclusions like freezing, and limitations on damages.

IMPORTANT OPERATING TIPS

Key Operating Tips

Tips include cleaning filters, removing debris, unit behavior, starting out of water, GFCI use, and power supply placement.

GENERAL OPERATION INSTRUCTIONS

Setup and Initial Operation

Covers selecting power sources, placing the unit, connecting components, and starting the cleaning cycle.

Cleaning Cycles and Post-Operation

Details automatic/manual shut-off, safe removal from pool, and cable care recommendations.

WATERLINE SCRUBBING

Checking Waterline Climbing Height

Instructions on observing and evaluating the unit's waterline climbing height during operation.

Installing the Thrust Restrictor Plate

Guides on installing a Thrust Restrictor Plate to correct incorrect climbing height.

TIGERSHARK QC OPERATING INSTRUCTIONS

Selecting Cleaning Cycles (QC Model)

Explains how to select between Quik Clean and Full Clean cycles on the QC model.

TIGERSHARK PLUS AND TIGERSHARK 2 PLUS OPERATING INSTRUCTIONS

Remote Control Operation (Plus Models)

Details using the remote control for directional changes and optimal placement of the power supply.

HAND HELD REMOTE CONTROL

Troubleshooting Remote Control Function

Provides solutions for issues with the remote control not operating the cleaner.

PART REFERENCE

Component Identification

Identifies various parts of the TigerShark cleaner using reference numbers and descriptions.

MAINTENANCE

Filter Cartridge Cleaning

Step-by-step instructions for cleaning the filter cartridge after each use.

Periodic Cleaning of Moving Parts

Guidance on cleaning pump outlet, impeller tube, tracks, and wheels.

Storage and Cable Care

Instructions for storing the unit and managing the power cable to prevent coiling.

IMPORTANT TIPS

Maximizing Performance

Tips for maximizing unit efficiency, including filter cleaning and chemical usage.

TROUBLESHOOTING

Troubleshooting Common Issues

Solutions for common problems like not climbing walls, poor debris pickup, or intermittent stopping.

SPECIFICATIONS

Technical Specifications

Detailed technical data including power, dimensions, materials, and shipping information.

FIGURES

Operation Figures

Visual illustrations for power supply placement, handle adjustment, and unit components.

FIGURES (cont.)

Maintenance Figures

Visuals demonstrating filter cartridge removal, cleaning, and reinstallation.

PREVENTATIVE MAINTENANCE

Maintenance Recommendations

Suggestions for regular maintenance to maximize efficiency and service life.

Parts Ordering Instructions

Steps for identifying and ordering replacement parts, including contacting service centers.

PRODUCT REGISTRATION

Warranty Card Registration

Instructions and fields for registering the product warranty online or by mail.

Related product manuals